131pcs Thread Repair Tool Helicoil Inserts Kit Metric M5 M6 M8 M10 M12
131pcs Thread Repair Tool Helicoil Inserts Kit Metric M5 M6 M8 M10 M12 131PC is ideal for restoring stripped, worn, corroded, or otherwise damaged inner threads as well as for maintenance work to protect aging threads from wear and tear. Suitable for M5, M6, M8, M10 and M12, the kit creates...
131pcs Thread Repair Tool Helicoil Inserts Kit Metric M5 M6 M8 M10 M12 131PC is ideal for restoring stripped, worn, corroded, or otherwise damaged inner threads as well as for maintenance work to protect aging threads from wear and tear.
Suitable for M5, M6, M8, M10 and M12, the kit creates a stronger internal thread in soft metals and protects tapped threads against wear and damage.
The tool includes insert installations, wire thread inserts, twist drill bits, thread taps, break pin tools.
Constructed with premium high-speed steel, the drill bits and screw taps offer superior quality and peak performance for faster and easier thread repair work.
The wire thread inserts are high quality stainless steel to resist wear and corrosion in situ.
【Applicable】
Suitable for engine repair,other automotive applications and daily home improvement.
【Specification】
Material: HSS steel & Stainless steel
【Includes】
5pcs x HSS Twist Drill Bits
5pcs x Break Pin Tools
5pcs x Insert Installation Tools
1pc x Hex Key
5pcs x Thread Taps
110pcs x Wire Thread Inserts:
25pcs x M5 x 0.8 x 6.7mm
25pcs x M6 x 1.0 x 8.0mm
25pcs x M8 x 1.25 x 10.8mm
25pcs x M10 x 1.5 x 13.5mm
25pcs x M12 x 1.75 x 16.3mm
【Installation and use】
DRILLING: Clear the damaged thread with a Standard Drill. To repair a spark plug thread no Pre-drilling is necessary if using the special Spark Plug Tap.
Please pay attention that for Fluteless Taps bigger holes are required.
CHECK: Check that thread and pitch of the tap and the bolt match.
TAPPING: Use the special V-Coil-Taps for cutting the holding thread into the cleared hole.
It is recommended to use suitable cutting oil.
INSTALL THE INSERT: Place insert on installation Tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Don't work against thread direction as the tang could break.
PIN REMOVAL: After finishing lift the installation tool and use the break pin tool to remove the tang. For bigger sizes and spark plug tags use long nose pliers to remove the tang. Due to the narrow and exact tolerances the new thread normally is stronger than the original one.
1. Drill out the damaged thread using the correctly sized twist drill bit provided.
2. Tap drilled hole using screw tap provided.
3. Load thread insert into installation tool.
4. Screw insert into threaded hole.
5. Remove the tag from the insert using the breaking pin tool.
Shipping & Delivery Policy
- Free Shipping in Australia.
- The products are located in our warehouse in the Australia.
- 1. Item location: AU - to be sent out in 1-2 workdays by AU Post or Fastway, provided tracking. Delivery time is 9-20 workdays for delivery.
- 2. Item location: AU - to be sent out in 5-8 workdays by AU Post or Fastway, provided tracking. Delivery time is about 15-25 workdays for delivery.
- 3. Item location: AU - to be sent out in 15-20 workdays by AU Post or Fastway, provided tracking. Delivery time is about 25-35 workdays for delivery.
- An email notification with tracking number will be sent to your contact email on/next day order shipped.